SOMFY Nina Timer io Installation & Programming Guide

17
IWC RTS & io Motors - programming and Basic setting Basic
Setting My position for products/motors in Non Tilt mode
Setting My position for products/motor in Tilt mode
1 Remove programmed My position
2
Place the blind in the down position
Place the blind in the my position
Place the blind in desired position
My can never be set the same as
up or down position
Press `my` until... ...motor jogs
Tilt up to desired slat angle Confirm the My position, press “My”
until motor jogs OK
Confirm the My position, press “My”
until motor jogs OK
5 sec.
5 sec.
5 sec.
Adjusting My position
Repeat procedure to a
new desired position
Adjusting My position
Repeat procedure to a new desired position
or
or
or
or
Complete range of IWC radio motors

SOMFY Nina Timer io Specifications

General

Brand	SOMFY
Model	Nina Timer io
Category	Remote Control
Language	English