45
Program sun disappearing position
Sonesse 30 RTS, Sonesse 40 RTS, (integrated) DC RTS receiver, Power 1 x 2,5 DC RTS,
Power 4 x 2,5 DC RTS (only valid in tilt mode for the DC RTS Receivers)
Roll up 24 WF RTS Li-Ion, Sonesse 28 WF RTS Li-Ion, Sonesse ULTRA 30 WF
RTS Li-Ion, Tilt&Li 25 WF RTS, Tilt Only 50 WF RTS, Sonesse 30 WF RTS
Additional function Advanced
...the shade moves
...motor jogs
Move the shades
to desired Sun
Disappearing position
In tilting mode: The shade will move to the lower
limit and return to the MY position.
In roller mode: The shade will move to the MY
position.
For Sonesse 30 RTS, press briefly.
For others press and hold
until motor jogs
Press simultaneously
until...
To confirm Sun
Disappearing Position,
press until...
2 sec.
2 sec.
-This function is available only if a MY position is recorder. If no sun disappearing position
is programmed the blind will not go up when sun disappears
or
or
...motor jogs
...motor jogs
Press simultaneously
until...
Press until...
Press UP
repeatedly
to increase speed
Press DOWN
repeatedly
to decrease speed
2 sec.
Set the motor speed
1 Enter setting
2 Confirm new speed
Sunsensor fuctions, setting when connected to outside sunsensor
To Next Page
Loading...
Need help?
General
