SOMFY Nina Timer io Installation & Programming Guide

41
Glydea ULTRA 35/60 DCT, Movelite 35 DCT
Set Touch motion or manual over ride mode
Reset motor to factory mode, erase all settings
Curtain track Basic
Press ‘UP’, ‘STOP’
and ‘DOWN’
until...
Press until......motor jogs
...motor has jogged three times
...motor jogs
Put the receiver
in programming
mode
To confirm setting,
press ‘STOP’ until...
...motor jogs
For setting of
- Glydea 35/60 DCT track speed, Follow procedure described for RTS control, page 38
- My position Follow procedure described for RTS control, page 36
High sensitivity Low sensitivity
No touch motion
Press again to move to
next function.
Press and hold “prog button”, “S button”, or “up-stop-down” until...
Glydea Movelite
OROR

SOMFY Nina Timer io Specifications

General

Brand	SOMFY
Model	Nina Timer io
Category	Remote Control
Language	English