66
Thermosunis Indoor Wirefree RTS
Activate the sensor
Setting and programming Advanced
1 Put the RTS motor / receiver in programming mode
2 Connect the sensor
Short press of the
prog button until...
The sun and temperature sensor
is active. The sun sensor LED
lights for 5 sec.
The sun sensor function is active.
The sensors Sun LED lights for
5 sec.
...motor jogs
...motor jogs
The sensor is set
on Off
Press the prog button on the
back of the control until...
OFF
F
The sensor is now connected and active
OR
OFF
F
OFF
F