SOMFY Nina Timer io Installation & Programming Guide

26
24 V RTS Receivers -Programming and basic settings Basic
(Integrated) DC RTS Receiver, Power 1 x 2,5 DC RTS, Power 4 x 2,5 DC RTS
Move the blind to it’s UP end limit ...The blind moves to it’s
set MY-position
Press until...
Press until... ...Motor jogs
1 To set a new MY-position, when in Tilt & Li mode
2 Move to the new desired MY-position
3 Confirm the new desired MY-position
- bottom bar in down end limit
- slats tilted to 45 degrees
With the up and down movement times set,
MY position is pre-set to:
5 sec.
5 sec.
or
or
or
Modify the MY position, in Tilt & li mode

SOMFY Nina Timer io Specifications

General

Brand	SOMFY
Model	Nina Timer io
Category	Remote Control
Language	English