25
(Integrated) DC RTS Receiver, Power 1 x 2,5 DC RTS, Power 4 x 2,5 DC RTS
24 V RTS Receivers - Programming and basic settings Basic
Press until...
Press until...
12 Confirm the time setting of open and close movements
11 Close time setting of open and close movements
10
A MY-position has now
automatically been set
Tilt&Li mode:
- Bottom bar in Down end position
- slats tilted to aprox. 45 degrees
Roll-up mode:
3/4 Down
If the blind’s still not in it’s UP position, repeat step 9
...motor jogs
...motor jogs twice