30
All DC RTS motors and receivers, all Li-Ion motors
Add or remove transmitters Basic
Sonesse 40 RTS/io, Sonesse (ULTRA) 50 RTS
2 Assign the new transmitter
1 Cut the power twice
10 sec in In2 sec out 2 sec out
...motor jogs
OK
Press the prog button
on the back of the
control until...
5 sec.
or
Replace lost transmitter
Replace lost transmitter
1 Press and hold programming button on motor or receiver
2 Record the new transmitter
Motor jogs two times OK
Press and hold programming button
...motor jogs ...motor jogs
OK
Press the prog button
on the back of the
control until...
Press simultaneoulsy
until...