35
Glydea ULTRA 35/60 RTS, Irismo 45 WF RTS, Movelite 35 RTS
Programming instruction
Curtain track Basic
3 Change if needed motor rotation direction
4 Record a RTS transmitter
Press simultaneously
until...
Press until...
Short press,
UP or DOWN.
OK
4 NOT OK 3
...motor jogs
...motor jogs
...motor jogs
Press the prog button
on the back of the
control until...
Only connect one motor to power whilst programming
1 Connect the RTS transmitter to the motor
2 Check the motor rotation direction
2 sec.
It’s recommended to perform
programming with curtain installed.
At the first command, open or close,
the curtain will make a complete run,
open & close, to record the hard end
limits.