SOMFY Nina Timer io Installation & Programming Guide

23
(Integrated) DC RTS Receiver, Power 1 x 2,5 DC RTS, Power 4 x 2,5 DC RTS
24 V RTS Receivers - Programming and basic settings Basic
Press simultaneously
until...
Short
simultaneous
press
Press stop
...motor jogs
Blind moves down
This setting is needed to
- set and use a MY position
- connect and use a sun sensor
- set a run time for conservatory roof blinds
1 Put the receiver in programming mode
2 Place the blind in the UP position
3 Set the down movement time
4
Set the time for open and close movement
5 sec.
If the blind reaches the
down position within
10 sec, go to step 4
Go to step 7
If the blind doesn’t reach
-
es the down position
within
10 sec, go to step 5

SOMFY Nina Timer io Specifications

General

Brand	SOMFY
Model	Nina Timer io
Category	Remote Control
Language	English