79
Connexoon Window RTS
To register the Connexoon
If the devices to be connected are coupled to a two-way remote control, the Connexoon should first be
registered with the details of the end user. Note: the user must have access to his mailbox to complete
the activation.
Go to www.somfy-connect.com to register the Connexoon (via PC,
Tablet or Smartphone). Enter the PIN code of the Connexoon. Then
enter the requested data. Confirm the activation e-mail that is sent to
the e-mail address (this should happen within 24 hours – otherwise,
contact Somfy)
Download the App(s).
Login on the Connexoon
(note: the login data are case-
sensitive).
First connect the Connexoon to the
Internet via the Ethernet cable.
The orange LED begins to blink.
Wait until the LED stays green.
(There is internet connetion)
@
To Next Page
Loading...
Need help?
General
