SOMFY Nina Timer io Installation & Programming Guide

42
Glydea ULTRA 35 /60 WT, Movelite 35 WT
Programming instruction
Please note, one of the two power wires, black or brown, needs to be connected to permanent power
during programming
For setting Use setting tool ref 9014599
Curtain track Basic
Modify motor rotation direction, if needed
Press ‘UP’, ‘STOP’
and ‘DOWN’ until...
Press ‘STOP’
until...
...motor jogs ...motor jogs
Place the curtain
away from the
end limits
Wiring instruction for Glydea ULTRA WT, Movelite WT
Motor can be used without programming.
When first connected
to power the motor will
run a full cycle to set the
end limits
Open
Close
Black wire
Brown wire
Blue wire
Yellow/Green wire

SOMFY Nina Timer io Specifications

General

Brand	SOMFY
Model	Nina Timer io
Category	Remote Control
Language	English