ModelName: Falcon_E
PartNumber: 4-164-613-11
127
127
Troubleshooting
Table of
Contents
Home
Menu
Index
Podcast
Cannot play back an episode.
The p
layer does not support the file format of the episode.
Ch
eck the file format playable on the player (
p. 160).
TV output
Music screen or video is not displayed on the television’s screen.
Set t
he [NTSC/PAL settings] setting according to the television you intend to
connect (
p.
46, 65).
[TV O
utput(Music)] or [TV Output(Video)] is not set to [On].
Set [T
V Output(Music)] (
p. 45) or [TV Output(Video)] (
p. 64) to [On].
Yo
u do not use the optional video/audio output cable (WMC-NWV10) to connect
the player and television.
Us
e the optional video/audio output cable (WMC-NWV10) to connect the
player and television. For details, refer to the video/audio output cable’s manual.
Yo
ur television’s input is not set to display image from the video/audio output cable.
Ma
ke sure that your television’s input is correctly chosen to display image from
the video/audio output cable.
Video image on the television screen is abnormal (e.g. black bars which seem to
be unnecessary appear, or image is stretched unnaturally).
Th
e [Z
oom Settings] setting of the player is wrong.
Ch
ange [Zoom Settings] of the player (
p. 68).
The [T
V Output Size] setting of the player is not set in accordance with your
television.
Ch
ange [TV Output Size] of the player according to your television’s screen (
p.
65).
The w
ide mode setting of your television is wrong.
Ch
ange the wide mode setting of your television.
Other
There is no beep sound when the player is operated.
[Be
ep Settings] is set to [Off].
Set [B
eep Settings] to [On] (
p. 102).
The b
eep does not sound when the player is connected to the optional cradle, or
another device.
The player gets warm.
Th
e p
layer may become warm when the battery is being charged and just after
charging. The player also may get warm when a large amount of data is transferred.
This behavior is normal and not cause for a concern. Set the player aside for a while
to allow it to cool down.
Continued
To Next Page
Loading...
