98
uS
The
S-AIR
function
Symptom
S-AIR connection
is
not
established (sound transmission
is
not established), e.g., the
indicator
of
the S-AIR sub unit
does the following:
• Turns off.
• Flashes.
• Turns red.
No sound
is
heard from the
S-AIR sub unit.
There
is
noise
or
the sound skips.
Remedy
• If you use another S-AIR main unit, place
it
more than 26 1/
4
feet
(8
meters)
away from the unit.
• Confirm the ID
of
the unit and S-AIR sub unit (page 61).
• You performed pairing the unit and another S-AIR sub unit. Perform pairing
of
the desired S-AIR sub unit (page 64).
• The unit
is
paired to another S-AIR sub unit. To cancel pairing, reset the ID
of
the unit and S-AIR sub unit (page 61).
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• The S-AIR sub unit
is
turned off. Make sure the AC power cord (mains lead)
is
connected and turn on the S-AIR sub unit.
•
If
you use another S-AIR main unit, place it more than 26
1/
4
feet (8 meters)
away from the unit.
• Confirm the ID
of
the unit and S-AIR sub unit (page 61).
• Confirm the pairing setting (page 64).
• Install the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use
of
equipment that generates electromagnetic energy, such as a
microwave oven.
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• Change the
"RF
CHANGE" setting (page 65).
• Change the ID settings
of
the S-AIR main unit and S-AIR sub unit.
• Turn
off
the system and S-AIR sub unit, then turn on them.
•
If
you use another S-AIR main unit, place
it
more than 26
1/
4 feet (8 meters)
away from the unit.
• Install the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use
of
equipment that generates electromagnetic energy, such as a
microwave oven.
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• Change the
"RF
CHANGE" setting (page 65).
• Change the ID settings
of
the S-AIR main unit and S-AIR sub unit.
To Next Page
Loading...
