90
GB
• When you turn the system off while [S-AIR
Standby] is set to [ON], the POWER /
ACTIVE STANDBY indicator in the front
panel display lights up in amber.
Identifying the subwoofer
with a specific S-AIR sub unit
(Pairing operation)
It is easy to set the same ID for the subwoofer
and an S-AIR sub unit to establish sound
transmission. However, neighbors may also
receive your system’s sound if IDs are the same,
or you may receive sound from neighbors. To
prevent this, you can identify the subwoofer with
a specific S-AIR sub unit by performing the
pairing operation.
x Before pairing
Sound transmission is established by ID
(example).
Note
This subwoofer
ID A
ID A
S-AIR sub unit
ID A
S-AIR sub unit
Your room
Neighbor
To Next Page
