Sony ICP-X1224 - Page 258

258
Effect timeline creation/edit flow
The path setting is configured in the menu.
After a keyframe path is changed, the [MOD] button in
t
he utility/shotbox control block must be pressed to apply
the modifications.
Editing a keyframe
You can edit an effect timeline by switching the utility/
shotbox control block to effect timeline/macro edit mode.
The operations during editing and the duration after
edi
ting may vary depending on the effect timeline
duration mode.
For details, see “Duration and Delay” (page 252).
1 Press the [KF MCRO EDIT] button.
The memory recall section switches to effect
t
imeline/macro edit mode.
2 Press the [EDIT ENBL] button, turning it on orange.
Effect timeline edit mode becomes enabled.
3 Edit using the edit buttons.
Selecting an edit point
Move to the target position for editing (edit point) on the
effect timeline.
To move to the previous keyframe
Press the [PREV KF] button.
To move to the next keyframe
Press the [NEXT KF] button.
To move to a specified timecode
Press the [GOTO TC] button, enter a timecode in the
numer
ic keypad area of the numeric keypad control
block, and press the [ENTER] button.
• You can also enter a difference value from the currently
se
t value using the [TRIM] button.
For details, see “Entering a difference from a current
value” (page 79).
• If multiple keyframes are positioned at the same
t
imecode, the keyframe with the lowest number is
selected.
To move to a specified keyframe number
Press the [GOTO KF] button, enter a keyframe number in
th
e numeric keypad area of the numeric keypad control
block, and press the [ENTER] button.
You can also enter a difference value from the currently
set
value using the [TRIM] button.
For details, see “Entering a difference from a current
value” (page 79).
Inserting a keyframe
1 Select an edit point.
2 Create the keyframe to insert.
3 Press the [INS] button.
The keyframe is inserted after the selected position.
Numeric keypad control block:
Select a region (see page 256).
Select the target region to set.
r
Numeric keypad control block:
Recall an effect timeline register (see page 256).
When creating, recall an empty register. When editing,
rec
all the target register to edit.
r
Utility/shotbox control block and numeric keypad control
bl
ock:
Select an edit point (see page 258).
Select a position on the effect timeline at which to insert a
k
eyframe, or select a keyframe to modify or delete.
r
Utility/shotbox control block and numeric keypad control
bl
ock:
Edit a keyframe (see page 258).
Insert, modify, or delete a keyframe.
r
Utility/shotbox control block and numeric keypad control
bl
ock:
Set a time (see page 260).
Set the execution time of the effect timeline.
r
Menu:
Set a path (see page 268).
Set the interpolation processing used between keyframes.
r
Numeric keypad control block:
Save the effect timeline (see page 257).
Save the created/edited effect timeline in an effect timeline
reg
ister.
Note
Note
Notes
Note