Sony ICP-X7000

422
List of utility commands and user preference button states
The following table lists the utility commands that can be
assigned to user preference buttons.
Command name Function Button state
Lit amber Off
PP PGM1 ST
a)
|
PP PGM4 ST
a)
P/P program output safe title enable/disable Enabled Disabled
PP PVW ST
a)
P/P preview output safe title enable/disable Enabled Disabled
PP CLEAN ST
a)
P/P clean output safe title enable/disable Enabled Disabled
PP K-PVW1 ST
a)
P/P key preview output safe title enable/disable Enabled Disabled
MEx PGM1 ST
a)
|
MEx PGM4 ST
a)
M/E-x program output safe title enable/disable
x = 1 to 5
Enabled Disabled
MEx PVW ST
a)
M/E-x preview output safe title enable/disable
x = 1 to 5
Enabled Disabled
MEx CLEAN ST
a)
M/E-x clean output safe title enable/disable
x = 1 to 5
Enabled Disabled
MEx K-PVW1 ST
a)
M/E-x key preview output safe title enable/
disable
x = 1 to 5
Enabled Disabled
Edit Preview ST
a)
Edit preview output safe title enable/disable Enabled Disabled
Preset ST
a)
Preset output safe title enable/disable Enabled Disabled
DME Monitor Video ST
a)
DME Monitor Video output safe title enable/
disable
Enabled Disabled
DME Monitor Key ST
a)
DME Monitor Key output safe title enable/
disable
Enabled Disabled
Aux1 ST
a)
|
Aux48 ST
a)
AUX1 output safe title enable/disable
|
AUX48 output safe title enable/disable
Enabled Disabled
DCU GPI1 Test Fire
|
DCU GPI50 Test Fire
Output test trigger from port assigned to DCU
GPI1
|
Output test trigger from port assigned to DCU
GPI50
Output (lit only at the
instant the button is
pressed)
Output assigned
Macro Attachment Enbl Macro attachment enable/disable Enabled Disabled
Macro AT with Rate Mode enable/disable for storing transition rate
when registering an auto transition macro
event on the transition control block or
transition control block (simple type)
Enabled Disabled
Macro AT with A/B Bus Mode enable/disable for storing A/B bus cross-
points when registering an auto transition
macro event on the transition control block or
transition control block (simple type)
Enabled Disabled
Macro TL with Region Mode enable/disable for saving target regions
when registering a timeline macro event
Enabled Disabled
Pre Macro Sets macro attachment in pre macro mode. Can be set only while
pressed (lit)
Function assigned
Post Macro Sets macro attachment in post macro mode. Can be set only while
pressed (lit)
Function assigned
Macro Take Resume macro execution Pause during
execution
•Executing
• Function assigned
Macro All Take Resume all paused macros in multi mode Pause during
execution
•Executing
• Function assigned