Name
Function
Name
Function
..
!ml
DVDI
Press to display the menus
of
~
CLEAR
Press to
TOP MENU,
the DVD player on the
TV
- clear a mistake when you
C)
MENU screen. Then use
+1+1+1+
and press the incorrect numeric
CD
...
8J
to perform a menu button.
=
:::s
operations (page 118). - return to continuous
(C
playback, etc.
of
the satellite
en
NIGHT Press
AMP
([ID), then press
...
tuner or DVD player.
£»
"'"
MODE NIGHT MODE to activate the
...
CD
NIGHT MODE function
>10
Press to select
Co
(page 67).
- track numbers over 10
of
the
INPUT
Press
AMP
([ID), then press
VCR, satellite tuner, CD
player
or
MD deck.
MODE
INPUT MODE to select the
- channel numbers
of
the
input mode when the same
Digital CATV terminal.
components are connected to
both digital and analog jacks
D.TUNING Press to enter direct tuning
(page 93). mode (page
77,82).
[gQ]
MUTING
Press to turn off the sound
[2§J
2CHI
Press to select sound field
temporarily. Press the button
A.DIRECT
(page 59)
or
to switch the audio
again to restore the sound.
of
the selected input to analog
[gj]
MASTER
Press to adjust the volume level
signal without any adjustment
VOL
+1-
of
all speakers at the same time.
(page 113).
l21l
A.F.D. Press to select sound field
TV VOL
+1-
Press
TV
(00),
then press TV
VOL
+1-
to adjust the volume
(page 60).
level
of
the
TV.
~
SHIFT
Press to light up the button.
It
[221
DISC SKIP
Press to skip a disc when using
changes the remote button
function to activate the buttons
a multi-disc changer.
with pink printing.
~
RETURNI
Press to return to the previous
~
SLEEP
Press to activate the sleep timer
EXIT 0-'
menu
or
exit the menu while the
menu
or
on-screen guide
of
the
function and the duration which
the receiver turns off
VCR, DVD player, or satellite
automatically (page 100).
tuner is displayed on the TV
screen.
00
TV
Press to enable the TV
~
DISPLAY Press to select information
operation.
displayed in the display
@j]
RM
SET UP
Press to set up the remote.
window, TV screen
of
the VCR,
a) See the table on page 118 for information on the
satellite tuner, CD player, DVD
player, BIu-ray Disc Player, or
buttons that you can use to control each
MD deck.
component.
Note
b)The tactile dot is attached to these buttons ([:::>,
In the SCREEN mode, press the
PRESET
+). Use as a mark
of
operation.
button to display the menu on
the
TV
screen.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible
or
may operate differently than described.
conunued----------
13
GB
To Next Page
Loading...
