To
change
the
lock
code
1 Press
+1+
repeatedly to select
"SIRIUS," then press
(B or +.
2 Press OPTIONS, then press
+1+
to
select "Lock Code," then press
(B.
"Enter your 4-digit lock code." appears.
3 Enter your 4-digit lock code using the
number buttons.
"Enter a new lock code." appears.
4 Enter a new 4-digit lock code using the
number buttons.
"To confirm, enter your new lock code
again." appears.
5 Reenter the new lock code with the
number buttons.
"The lock code has been changed."
appears.
To
listen
to
the
locked
channels
1 Press
+1+
repeatedly to select
"SIRIUS," then press
(B or
+.
2 Select a locked channel you want to
listen to using "Direct Tuning"
(page 82).
"The channel is locked. Enter your 4-digit
lock code." appears.
3 Enter your 4-digit lock code using the
number buttons.
The channel is tuned in.
To
cancel
the
Parental
Lock
1 Press
+1+
repeatedly to select
"SIRIUS," then press
(B or
+.
2 Tune
in
the channel you want to unlock
using "Direct Tuning" (page 82).
3 Press OPTIONS, then press
+1+
to
select "Parental Lock," then press
(B
or+.
4 Press
+1+
repeatedly to select "OFF,"
then press
(B.
"Enter your 4-digit lock code." appears.
5 Enter your 4-digit lock code using the
number buttons.
"The channel has been unlocked." appears
and the channel is unlocked.
Notes
• When you select a channel using Category Tuning,
locked channels are skipped.
• When the receiver is reset to the factory settings,
the lock code returns to the default (0000), but the
Parental Lock settings are not removed.
• You cannot preset locked channels.
If
you set the
Parental Lock for a preset channel, the preset
information for that channel returns to the default.
• You cannot set the Parental Lock for channel 0
or
channel 184.
•
conunued---------
85
GB
To Next Page
Loading...
