Sony STR-DA3300ES - Page 84

Restricting access to specific
channels (Parental Lock)
(SIRIUS only)
You can restrict access to certain channels
using your own lock code.
The lock code is set
to
"0000" as the default.
Change the lock code before you use this
function for the first time (see
'To change the
lock code").
.J--...4+-- 6
2,
1-1+-4,5
[.HI-4
1 Make sure that the AMP button
is lit.
If it is not lit. or "GUI MODE" is not
displayed
in the display window of the
receiver. follow the steps given
in "7:
Operating the receiver using the GUI
(Graphical User Interface)" (page 38).
2 Press +/+ repeatedly to select
"SIRIUS," then press
8) or +.
3 Select a channel you want to
lock using Category Tuning
84
GB
(page 81) or Direct Tuning
(page 82).
4 Press OPTIONS, then press +/+
to select "Parental Lock," then
press
8) or +.
5 Press +/+ repeatedly to select
"ON," then press 8).
"Enter your 4-digit lock code'" appears.
6 Enter your 4-digit lock code
using the number buttons.
'The channel has been locked." appears
and the Parental Lock is set.
To delete the numbers you have entered.
go back to step 4 by pressing
RETURN/
EXIT 0". and then repeat the procedure
above from step 4.