Sony STR-DA3300ES - Page 98

Name Function Name Function
"Analog".
[I§] D.C.A.C. Lights up when auto
calibration is activated.
[Z] ZONE 2 Lights up while operation in
zone 2
is being enabled.
[H] EQ Lights up when the
equalizer
is activated.
Lights up when the disc
being played back contains
an L.F.E. (Low Frequency
Effects) channel and the
L.F.E. channel signal is
actually being reproduced,
the bars underneath the
letters light up to indicate
the level. Since the L.F.E.
signal is not recorded in all
parts
of the input signal the
bar indication will t1uctuate
(and may turn off) during
playback.
Lights up when the sleep
timer is activated.
~ L.F.E.
[2Q] DDDIGITAL Lights up when the receiver
(EX)
is decoding Dolby Digital
Surround signals. When the
receiver
is decoding Dolby
Digital Surround EX
signals, "DDDIGITAL
EX"
also lights up. When
playing a Dolby Digital
format disc,
be sure that you
have made digital
connections and that
INPUT
MODE is not set to
[ill] SLEEP
[1§] SIRIUS Lights up when the
SiriusConnect Home tuner
is connected and "SIRIUS"
is selected.
[J]] D.RANGE Lights up when dynamic
range compression is
activated.
[11] XM Lights up when XM Mini
Tuner and Home Dock are
connected and
"XM" is
selected.
[1] MULTI IN Lights up when multi-
channel input
is selected.
[Q] ANALOG Lights up when INPUT
MODE is set to "AUTO"
and no digital signal is
being input through the
COAXIAL or OPTICAL
jacks, or when INPUT
MODE is set to
"ANALOG,"
or when the
"2ch Analog Direct"
is
being used.
ffiJ DMPORT Lights up when DIGITAL
MEDIA PORT adapter
is
connected.
[[] OPT Lights up when INPUT
MODE is set to "AUTO"
and the source signal is a
digital signal being input
through the
OPTICAL jack.
lliJ COAX Lights up when INPUT
MODE is set to "AUTO"
and the source signal is a
digital signal being input
through the
COAXIAL
jack.
[l] 96/24 Lights up when the receiver
is decoding DTS 96/24 (96
kHz/24 bit).
~ INPUT Lights up constantly. One of
the input indicators also
lights up according to the
current input.
@] AUTO Lights up when INPUT
MODE is set to "AUTO".
[[] HDMI Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack.
98
GB