User Manual
11.4: SOFTWARE UPDATE
SYSTEM SETTINGS > SOFTWARE UPDATE
11.4: SYSTEM SETTINGS > SOFTWARE UPDATE
The Si EXPRESSION software is updated via the USB port on the front panel. Details and special
instructions for any release will be included with the software release package; however, the ‘normal’
procedure is listed below for reference:
1. Unzip the les to a USB key in the root directory, you should have two or three les: Expression.
bin; info.xml; PerformerFader.hex (optional, see release notes).
2. Switch the console off using the Power key (Press and hold Power Key until it ashes orange,
then press it again).
3. Press and hold the Power key for approx 5 seconds. A Software Loader screen shall appear.
4. Insert the USB stick and then press the MENU key.
5. Select the info.xml le using the adjust encoder. The LOAD button at the bottom right of the touch
screen window will appear when a valid selection is made.
6. Press the LOAD button. Software will begin loading.
7. Wait until both progress bars have reached 100%, and the ‘tick’ symbol has appeared to the right
of each progress bar, before removing the USB stick.
NOTE: Always follow on-screen instructions and release notes as updates to fader rmware
or similar may require additional user input.
To Next Page
Loading...
Need help?
General
