User Manual
SHOWS, CUELIST > CUELIST > EDIT CUE
9.2.1: SHOWS, CUELIST > CUELIST > EDIT CUE
MIDI Receive
Set the Cue to recall when the console receives a particular program change message.
In the event two or more cues are set to receive the same program change on the same MIDI channel the console
shall play the first cue in the CUE LIST that satisfies the condition.
MIDI Program Change
Turn the program change function On or Off.
The Snapshot will be added to the end of the Cuelist and named automatically "Unnamed Snapshot n" where 'n' is
the snapshot's numbered position
MIDI Program Number
Choose a MIDI Program Change number.
MIDI Channel
Choose a MIDI channel for the specied Program Change number.
MIDI Receive settings can specify Omni (all MIDI channels) as an option here.
HiQnet Transmit
Set the console to send a HiQnet Venue preset when the Cue is recalled.
Console network settings, including IP settings and HiQnet Enable and Address options can be found in the Touch
Screen SYSTEM menu - reference chapter 11.
HiQnet Venue Recall
Set Venue Recall On or Off for the Cue.
HiQnet Venue Number
Set the transmitted Venue number for this Cue.
9.2.1: EDIT CUE
To Next Page
Loading...
Need help?
General
