User Manual
8.0: MIX FEATURES
MIX FEATURES
8.1: MIX FEATURES > MUTE GROUPS
Si Expression Mix Features include mix functions outside the normal audio signal path: Mute
Groups, Copy and Paste, Interrogate, the Solo system, Monitoring, and the CLR and ALT + CLR
facilities.
8.1: Mute Groups
Set up groups of channels that can be muted with a single button press. You can create up to four mute
groups, operated by the Mute Group Master buttons 1-4. Mute groups are cumulative so activating a sec-
ond Mute Group Master will add those channels to the number of muted channels.
8.2: Copy & Paste
Copy then Paste whole channels, channel sections, FX settings, and Mix bus, FX send, and Matrix bus
mixes. Press the PASTE button in the Touch Screen Main Menu to begin the process.
8.3: Audio Interrogate
Interrogate and change the status of ACS button across every channel simply by pressing and holding that
button. For example, check the status of all channels in one go! Press and hold the button to enter Interro-
gate mode.
8.4: Solo System
Listen to individual channels on the monitor mix or main mix (Solo In Place). The automatic solo mode
function chooses PFL or AFL depending on where one or more channels are soloed.
8.5: Monitoring
The Engineer’s mix. Solo system integration, delay, mono check, and patchable outputs,
8.6: CLR & ALT + CLR
Special modier buttons for clearing or resetting individual channel settings or settings across the whole
console.
8.0: MIX FEATURES
To Next Page
Loading...
Need help?
General
