User Manual
7.1: FUNCTION FOCUS
DSP ELEMENTS > FUNCTION FOCUS
7.1: FUNCTION FOCUS
Function Focus allows pinpoint adjustment of any controls and settings by automatically detailing
the value of both the control you are currently adjusting and any other controls in its group, plus the
channel name and alternate units for the same control.
For example, DELAY is illustrated in ms (milliseconds), feet, and meters, while EQ lter ‘Q’ is shown
as both Q and bandwidth (octaves).
The Function Focus display can be ‘pinned’ (displayed even when the control is inactive) to the
screen by touching it while it is displayed. Touching it again will unpin it.
To Next Page
Loading...
