User Manual
9.2: CUELIST & SNAPSHOTS
SHOWS, CUELIST > CUELIST
9.2: SHOWS, CUELIST > CUELIST & SNAPSHOTS
The Si Expression incorporates a comprehensive Cuelist and snapshot automation system for fast
access to preset console states and for working with other performance systems via MIDI and
Harman’s HiQnet.
A snapshot is a ‘picture’ of the entire console state - all settings, patching, routing, and so on. A cue
is essentially a snapshot of the console’s state, plus automation parameters: MIDI Transmit (a MIDI
message sent when a cue is recalled), MIDI Receive (a MIDI message that will recall a the snap-
shot), and HiQnet Transmit (send a HiQnet venue preset event).
When you store a cue, you also take a snapshot to be stored with that cue. The console’s Cuelist is
a list of cues that can be recalled when required. The Cuelist is stored within a Show (see 9.1).
The primary snapshot/cue controls are the Cuelist button group: CUE LIST, STORE, NEXT, and RE-
CALL. These are located just above the main Left/Right and Mono Master Control Channels.
The CUE LIST button gives access to the detailed Cuelist editing and functionality on the Touch
Screen.
Please Note: Isolate lters (isolating parameters and channels from automation / Cue recall) are set
elsewhere. The Global Isolates are available in the SHOW menu, and channel isolates are set in the
INPUTS / OUTPUTS menus.
To Next Page
Loading...
