User Manual
8.1: MUTE GROUPS
MIX FEATURES > MUTE GROUPS
8.1: MIX FEATURES > MUTE GROUPS
SEL
Select Control Channels.
While in Mute Group SETUP mode, with a Mute Group Master active, use the Control Channel SEL buttons to choose
which channels should belong to that Mute Group. Orange highlighted SEL buttons indicate members of the current-
ly selected Mute Group.
CLR
Clear Selection.
While in Mute Group SETUP mode, holding the CLR button and pressing a Mute Group Master button will clear that
Mute Group.
ALT + CLR
Clear all.
While in Mute Group SETUP mode, holding ALT + CLR and pressing Mute Group Master Button will clear all Mute
Groups.
ON
Mute status indication.
Red illuminated ON buttons indicate a channel that has been muted by a Mute Group Master, Green ON buttons indi-
cate an active, un-muted channel, and an unlit ON button indicates an inactive channel, muted via the ON button.