Space ER 200 - Page 32

INSTRUCTION MANUAL
SPACE s.r.l.
ER 200 - ER 220
ER150 - ER160 - ER165
Code M0076 - rev.1.6
(04/2005)
Page 30/ 40 SPACE s.r.l. – 10090 Trana (TO) Via Sangano, 48
Tel. (+39) 011/ 933.88.65 – Fax (+39) 011/ 933.88.64
e-mail: info@spacetest.com
Figure 38
Press the “F4 key” to confirm weight positioning behind the spoke and continue.
The display screen will show the page in Figure 36 for fitting the second weight.
Correctly position the wheel (see para. 7.3.2 on page 21).
Fit the second adhesive weight on the measurement rod as shown in Figure 37.
Fit the adhesive weight inside the spoke at the point indicated on the display screen Figure
38.
Press the “F4 key" to confirm positioning of second weight behind the spoke.
The system displays the initial unbalance situation before performing the RAZ procedure
Perform another trial spin. The display screen will display an unbalance reset.
The RAZ procedure is completed.
Distance on black
background for
correcting the
outside unbalance.
Value displayed
when near to fitting
point
Exact position of
wheel for fitting
weight