SpectraLink 8440 - Page 74

Spectralink 84-Series Series Wireless Telephones Administration Guide
1725-86984-000_P.docx
September 2016 74
Parameter
Permitted Values
Default
np.meeting.alert.pttTransmit.tonePatterna
np.meeting.alert.pttTransmit.vibration
Any tone (see se.pat.misc)
0 or 1
misc3
0
The tone pattern and vibration (1 to enable) for the alert played if sending a push-to-talk page.
np.meeting.alert.pttWait.tonePattern
np.meeting.alert.pttWait.vibration
Any tone (see se.pat.misc)
0 or 1
misc4
0
The tone pattern and vibration (1 to enable) for the push-to-talk wait alert.
np.meeting.alert.welcome.tonePattern
np.meeting.alert.welcome.vibration
Any tone (see se.pat.misc)
0 or 1
Welcome
0
The tone pattern and vibration (1 to enable) for the alert played when the handset turns on.
np.meeting.ringing.calls.tonePattern
A ringer (see se.pat.ringer)
ringer1
The ringtone (see se.pat.ringer) and vibration (1 to enable) for normal calls.
np.meeting.ringing.calls.vibration
off, continuous, shortPulse,
longPulse
continuous
The ringtone (see se.pat.ringer) and vibration (1 to enable) for normal calls.
np.meeting.ringing.oai1.tonePattern
A ringer (see se.pat.ringer)
ringer1
The ringtone (see se.pat.ringer) for Open Application Interface (OAI) communications.
np.meeting.ringing.oai1.vibration
off, continuous, shortPulse,
longPulse
continuous
The vibration pattern for Open Application Interface (OAI) communications.
np.meeting.ringing.oai2.tonePattern
A ringer (see se.pat.ringer)
ringer1
The ringtone (see se.pat.ringer) and vibration (1 to enable) for Open Application Interface (OAI) version 2.2
communications.
np.meeting.ringing.oai2.vibration
off, continuous, shortPulse,
longPulse
continuous
The vibration pattern for Open Application Interface (OAI) version 2.2 communications.
np.meeting.ringing.privateLine.tonePattern
default, ringer1 to ringer24
ringer9
The ringtone (see se.pat.ringer) for a private line registered to Microsoft Skype for Business or Microsoft Lync
Server 2013 or 2010.
np.meeting.ringing.privateLine.vibration
off, continuous, shortPulse,
longPulse
shortPulse
The vibration pattern for a private line registered to Microsoft Skype for Business or Microsoft Lync Server 2013 or
2010.
np.meeting.ringing.toneVolume.handset
-1000 to 1000
-21
The attribute is set (on adjusting ring volume) when ringing termination is Headset and Meeting profile is active.
Although the permitted values are -1000 to 1000, the practical limits used by the handset are -50 to 10.
np.meeting.ringing.toneVolume.headset
-1000 to 1000
-21
The attribute is set (on adjusting ring volume) when ringing termination is Headset and Meeting profile is active.
Although the permitted values are -1000 to 1000, the practical limits used by the handset are -50 to 10.
np.meeting.ringing.toneVolume.chassis
-1000 to 1000
0
The attribute is set (on adjusting ring volume) when ringing termination is Chassis and Meeting profile is active.
Although the permitted values are -1000 to 1000, the practical limits used by the handset are -50 to 10.