Basic Configuration
RAC2V1A Router User Guide 19
1. Access and sign in to the configuration interface.
2. Click the WAN Setup tab.
3. Click Dynamic (IPv4), Static (IPv4), Dynamic (IPv6), or Static
(IPv6) in the side menu to display the appropriate screen for
configuring that type of WAN connection.
4. Set the required configuration parameters for the connection type
you selected as provided by Spectrum.
Note: Refer to WAN Setup in
Router Configuration Screen
Descriptions
(page 28) for specific instructions on setting the various
connection type configuration parameters.
5. Click Apply at the bottom of the screen.
To Next Page
Loading...
