Spectrum RAC2V1A - DNS Settings

Router Configuration Screen Descriptions
RAC2V1A Router User Guide 35
MTU Maximum Transmission Unit. This is a measure of
Internet packet size, in bytes, that can be forwarded
to the network. You should not change this field
unless specifically directed to do so by Charter.
Click here to
enter your DNS
Settings
If Spectrum gave you specific DNS settings, click
here to go to the DNS Settings screen to enter
those settings.
DNS Settings
Use this screen to change your DNS settings, if necessary.
Note: In most cases, you will not need to change your DNS settings.
DNS Settings
Automatic from
ISP
Click this checkbox if the router should
automatically get its DNS settings from Spectrum.
Primary DNS
Server IP
Enter the IP address of the primary DNS server.
(This field is only available if Automatic from ISP is
not checked.)
Secondary DNS
Server IP
Enter the IP address of the secondary DNS server.
(This field is only available if Automatic from ISP is
not checked.)