Spectrum RAC2V1A User Manual

Advanced Configuration Options
RAC2V1A Router User Guide 27
the applications that are set up in the gateway's port forwarding table
without knowing your current IP address.
Requirements
In order to use DDNS you must first create an account with a DDNS
provider. The DDNS provider maps your chosen domain name to your IP
address.
Once the account is established, perform the following steps to enable
DDNS.
1. Access and sign in to the configuration interface.
2. Click the Utilities tab.
3. Click DDNS in the side menu to display the DDNS configuration
screen.
4. Click the DDNS Enable checkbox.
Note: Refer to DDNS (page 85) for specific instructions on setting
the various DDNS configuration parameters.
5. After setting the necessary configuration parameters, click Apply at
the bottom of the screen.

Spectrum RAC2V1A Specifications

General

Brand	Spectrum
Model	RAC2V1A
Category	Network Router
Language	English