Router Configuration Screen Descriptions
RAC2V1A Router User Guide 43
LAN Settings (IPv6)
IP Address (IPv6) This field displays the IPv6 address of the LAN. An
IPv6 address has eight groups of four hexadecimal
digits (0-9, a-f). The groups are separated by
colons, for example,
2001:0db8:85a3:0000:0000:8a2e:0370:7334. A
double colon (::) is shorthand for an address of all
Length of the network portion of the IPv6 address.
Link Local
IPv6 address that can be used only on this LAN
DHCP Server Settings (IPv6)
DHCP Ranges
Click the checkbox if you want to enable the LAN
Start IP Address
(IPv6)/End IP
Enter the range of IPv6 addresses that the DHCP
Server will be allowed to assign to a network
Lease Time
(IPv6)
Select the time before the assigned IP address will
expire. (After the lease time is up, the user is
automatically assigned a new dynamic IP address.)
A "lease" is the amount of time that a given IP
address will be valid for a computer or other
network device. The lease time can vary depending
on how long a user is likely to require the Internet
connection at a particular location. Using very short
leases, DHCP can dynamically reconfigure networks
where there are more computers than available IP
addresses, such as educational environments.
Enable DHCP
Click the checkbox to enable DHCP Relay
functionality on the system.
To Next Page
Loading...
Need help?
General
