SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE
Type Select Function
The DX7 features two programming types: Airplane and Helicopter. The DX7 can memorize data for up to
20 models individually.
[TYPE SELECT]
MODEL 1
◊HELI
ACRO
INCREASE and DECREASE key
Press to enter
TYPE SELECT
Hold while turning on transmitter
To Enter the Type Select Mode
Press the DowN and SELECT keys simultaneously, then turn on the transmitter.
Press the UP key until the TYPE SELECT function appears on screen.
[TYPE SELECT]
YES-> CLEAR KEY
MODEL 1
◊HELI
ACRO
Press the INCREASE and DECREASE key
Press to accept new model type
To Select a Model Type
Press the INCREASE or DECREASE key to toggle between the heli or acro model types.
To accept the new model type press the CLEAR key. All settings will be set to the factory defaults.
Model Reset/Integrated Timer
The Model Reset function resets all programming functions to their default settings. This screen also allows you
to reset the integrated timer function to zero.
[MODEL RESET]
MODEL 1 HELI DSM
◊DATA RESET
INTEG-T
0:00:34
Press to enter
MODEL RESET
Hold while turning
on transmitter
Press to select
RESET or INTEG-T
Press to reset data
To Reset a Model
• Press the DowN and SELECT keys simultaneously, then turn on the transmitter.
• Press the UP key until MODEL RESET appears on screen.
• Press the SELECT key until DATA RESET is highlighted.
• Pressing the CLEAR key will reset the model memory to factory default settings.
[MODEL RESET]
MODEL 1 HELI DSM
◊DATA RESET
INTEG-T
0:00:34
INCREASE and DECREASE key
Press to enter
MODEL RESET
Hold while turning
on transmitter
Press to select
RESET or INTEG-T
Press to reset timer
To Reset the Integrated Timer
• Press the DowN and SELECT keys simultaneously, then turn on the transmitter.
• Press the UP key until the MODEL RESET function appears on screen.
• Press the SELECT key until INTEG-T is highlighted.
• Pressing the CLEAR key will reset the INTEG-T to factory zero.