SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE SPEKTRUM DX7 • HELICOPTER PROGRAMMING GUIDE
Warning Screen for Throttle Hold/Stunt Mode
When the DX7 is operated in the helicopter mode, there is a warning system that is employed to avoid hot starts
(accidental high throttle startups) when the power switch is initially turned ON. If the flight mode switch or
throttle hold is on, an alarm will sound and a warning message will be displayed on the LCD. When all switches
are returned to the normal condition, the display will return to normal.
Note: If the Throttle Hold function is not activated prior the power switch being turned ON,
no alarm will sound. Below is the display example of WARNING CONDITION when the power
switch is ON.
Gyro Connections
Note: The Gyro Gain channel can be selected to operate on Channel 5 (Gear) or Channel 7 (AUX
2). See input Select on page 78 for detail on selecting the gain channel.
System Setup Mode
Includes programming functions that are normally used during setup. System Setup
programming functions include:
MODEL 1
10.6V
SPEKTRUM DX7 2.4GHz
INCREASE and DECREASE key
UP and DOWN key
Hold while turning on transmitter CLEAR key
To Enter the System Setup Mode
• With the power switch off, press and hold the DowN and SELECT keys simultaneously.
• Turn on the power switch.
• The system will display the last system setup screen that was used.
To Exit the System Setup Mode
• Press the DowN and SELECT keys simultaneously.
• The main menu will be displayed.
• Or turn the transmitter off to exit the System Setup Mode.
[MODEL NAME]
MODEL 1 HELI
DSM <T-REX450>
≥
[MODEL SELECT]
◊SELECT
MODEL 1 T-REX
HELI DSM
[TYPE SELECT]
MODEL 1
◊HELI
ACRO
[MODEL RESET]
MODEL 1 HELI DSM
◊DATA RESET
INTEG-T
0:00:34
[INPUT SELECT]
≥AUX2 GEAR
GYRO INH
[TRAINER]
≥NORMAL
SW:L-ROCKER
Model Select (page 72)
Model Name (page 73)
Type Select (page 74)
Model Reset (page 75)
Swash Type (page 80)
Input Select (page 78)
Throttle Recovery
(page 77)
Trainer (page 76)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
