To Enter the Function Mode
• Turn the transmitter on.
• From the main screen press the DowN and SELECT keys simultaneously.
• The system is now in Function Mode and will display the last screen that was used in Function Mode.
To Exit the Function Mode
• Press the DowN and SELECT keys simultaneously. The system will return to the main screen.
List Modes
The list mode screens display all the functions onscreen, allowing the access of any function without having to
scroll through each screen. Note that there are two list modes: a System Setup list mode that displays all the
system setup functions and a Function list mode that displays all the system programming functions.
To enter the System Setup List Mode, with the system on and in any System Setup function, press the UP and
SELECT keys simultaneously.
To enter the Function List mode, with the system on and in any function mode screen, press the UP and
SELECT keys simultaneously.
In either List Mode, pressing the UP and DowN keys will move the cursor to the desired function. Then
pressing the DowN and SELECT keys simultaneously will access the selected function.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
