Spektrum DX7 Instruction Manual

62
63
SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
Programmable Mixing 1–6 (continued)
Assigning Channels
Press the DowN and SELECT keys simultaneously to access the Function Mode.
In Function Mode, use the UP or DowN key to select the desired PROG. MIX screen (1–6).
Press the INCREASE or DECREASE key to select the desired master channel.
Press the SELECT key to highlight the slave channel.
Press the INCREASE or DECREASE key to select the desired slave channel.
[PROG.MIX1]
THRO≥ THRO ON
◊
RATE: 0%
0%
SW:ON
OFFSET: 0
Press to adjust MIX value
Press to enter PROG MIX
Press to enter
Function Mode
Press to return
value to default
Press to
highlight RATE
Assigning Mixing Values
Press the DowN and SELECT keys simultaneously to access the Function Mode.
In Function Mode, use the UP or DowN key to select the desired PROG. MIX screen (1–6).
Press the SELECT key to highlight RATE.
Using the stick or switch that is assigned to the master channel, move that stick or switch in the desired
direction that you wish to adjust the mix value.
Press the INCREASE or DECREASE key to adjust the mix value. Values are adjustable from -125% to +125%.
Note: If a switch is assigned to the mix, that switch must be turned on to allow mixing values to
be changed.
Moving the stick or switch in the opposite direction will allow the mix value to be adjusted in the
opposite direction.
Programmable Mixing 1–6 (continued)
[PROG.MIX1]
THRO≥ THRO ON
◊
RATE: 0%
0%
SW:ON
OFFSET: 0
Press to adjust OFFSET value
Press to enter PROG MIX
Press to enter
Function Mode
Press to return
value to default
Press to
highlight OFFSET
Assigning an Offset
Press the DowN and SELECT keys simultaneously to access the Function Mode.
In Function Mode, use the UP or DowN key to select the desired PROG. MIX screen (1–6).
Press the SELECT key to highlight OFFSET.
To establish the offset position, use the INCREASE or DECREASE key to change the value to the desired point.
The stored offset value will appear onscreen.
To change the offset value, simply use the INCREASE or DECREASE key to change the value. Pressing the
CLEAR button will reset the offset to 0.
Assigning a Switch
Press the DowN and SELECT keys simultaneously to access the Function Mode.
In Function Mode, use the UP or DowN key to select the desired PROG. MIX screen (1–6).
Press the SELECT key to highlight SW.
Use the INCREASE or DECREASE key to select the desired switch to turn on/off the mix.
• ON: Mixing Always On
• MIX: Mixing Switch Toward Self
• Flap 0: Flap Switch in Flap 0 Position
• Flap 2: Flap Switch in Flap 2 Position
• Gear: Gear Switch

Spektrum DX7 Specifications

General

Interface	RF Wireless
Product color	Black
Remote control proper use	-
Built-in display	Yes
Maximum range	- m
Frequency band	2.4 GHz
Channels quantity	7 channels
Number of devices supported	250
Battery capacity	2000 mAh
Quantity per pack	1 pc(s)

Weight and Dimensions

Weight	- g