SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE SPEKTRUM DX7 • AIRCRAFT PROGRAMMING GUIDE
Timer
The DX7 features an onscreen timer with three programming options.
INH:
Inhibit- In this mode the timer is turned off.
Down-T:
Down Timer- The countdown timer allows a preset time in ten-second intervals up to 59 minutes and 50
seconds to be programmed, and when that time expires, a beeper will sound for 10 seconds.
STOP-W:
Stopwatch- The stopwatch function is a simple count-up timer that displays minutes and seconds up to 59
minutes and 59 seconds.
When the DOWN-T or STOP-W function is selected, the timer will be displayed on the main screen. The
following buttons are used in conjunction to operate the timer function.
INCREASE or DECREASE keys:
Used to start, stop and restart the timer.
CLEAR key:
Used to reset the timer to the preset time (Down-T) or to reset the stopwatch timer to 0:00.
MODEL 1
SPEKTRUM DX7 2.4GHz
10.6V
DOWN-T
10:00
Press the INCREASE or DECREASE
key to start or stop the timer
Press the CLEAR key to reset the timer
Press the DowN and SELECT keys simultaneously to access the system mode.
In System Mode use the UP or DowN key to select the TIMER screen.
Press the SELECT key to select STOP-W, DOWN-T or INH.
With DOWN-T selected press the INCREASE or DECREASE key to change the preprogrammed time.