Installation and Reference Manual
Platform Overview
Installation and Reference Manual v3.2/0410/6 11
• It is connected to LAN PWR port on the back of the 4100 Call Server and/or 4200 Trunk Module
• The LAN PWR port provides power to 2 spare pairs on Ethernet ports
• Up to 8 IP Phones can be powered via the Powered Ethernet PSU.
• Supports the 802.3af Power over Ethernet standard
This is an external power supply providing the PCS 400 IP phones with local power for applications not
using power over LAN, eg Wireless LAN connected phones.
Single Terminal Ethernet Power Supply (STEPS)
This is an External Power over Ethernet PSU for the PCS 580, 570, 560, 410, 400 and100 or other 802.3af
compliant devices.
Please note:
• if a PCMCIA card is required in the PCS 400 a standard PCS PSU must be used.
• If used with a PCS 580G or PCS 570G the LAN port (port 1) will not run at 1G.
Voice Compression Card
max
imiser supports G.711 encoding with echo suppression as standard for transporting
voice. Where compressed voice is a requirement, G.729a between Call Servers is supported through
optional internal Voice Compression Cards, one fitted at each end. This feature will support up to 8
channels.
Please refer to page 326 for further technical data on these products.
imiser
This PC application provides the follow facilities:
• Standard telephony functionality
• CLI display
• Context sensitive toolbar
• Fully integrated with the system database for
speeding dialling, viewing and annotating
customer records and notes
• Ability to display real time video and graphical
information during a call
• Operator Console Mode available with an Operator
Console licence
• Can be run as either an IP soft phone or as a
partner to a PCS 580, 570, 560, 410/400, 100, 10, 5
or an alternative analogue handset.
• Available for MS Windows and Apple Mac OS X v10.4 or above
Please refer to the PCS 60 section from page 58 for further details.
To Next Page
Loading...
