Splicecom Maximiser - Trunks

Installation and Reference Manual
Field Descrptions
300
Installation and Reference Manual v3.2/0410/6
Park Timeout
Default 5 mins. Any call parked by a User who is a member of this Company will be held in the Park Slot
for the time (in seconds) specified in this field and then represented to the User.
Outbound Record Mailbox
The name of the User or Department into whose voicemail box outbound external calls will be recorded
when the DialRecord Dial Plan Action is used to make an external call.
Inbound Record Mailbox
The name of the User or Department into whose voicemail box inbound external calls will be recorded
when a DDI Plan entry is configured to automatically record inbound external calls for this Company.
Trunks
General page
Name
64 Doman Characters. Name of this trunk. Not configurable.
Description
128 Characters. Text description of this trunk.
Presentation Number
64 Characters. The Telephone Number to be presented as a CLI on outgoing calls when no other
alternative exists.
DDI Call Plan
Name (GUID) of the DDI Plan to be used to route incoming calls on this trunk and to determine the
outgoing CLI for a call.
Dial Plan
The name of the Dial Plan to be used if the DDI Call Plan field is empty. For use with ISDN equipment
connected to this port.
Capacity
Number. The quantity of channels/connections available on this trunk.
Reserve Incoming Capacity
Number. The quantity of channels specified in the Capacity field, to be reserved solely for incoming calls.
Reserve Voice Capacity
For future use
Reserve Data Capacity
For future use
Port
ISDN – default 0
SIP trunk– default 5060
H323 trunk – default 1720