Splicecom Maximiser - Auto Attendant; Modules

Installation and Reference Manual
Field Descrptions
310
Installation and Reference Manual v3.2/0410/6
Say on Busy
The message to be played when the Transfer To extension number is busy. This can be text that will be
converted to speech or the name of the .wav file stored on the internal Web Server.
Go To On No Answer
The name of the Form to be presented to the caller when the Transfer To extension number is
considered not answered as specified by the Transfer Timeout field.
Say on No Answer
The message to be played when the Transfer To extension number is considered not answered as
specified by the Transfer Timeout field. This can be text that will be converted to speech or the name of
the .wav file stored on the internal Web Server.
Auto Attendant
Name
1 character. The digit to be dialled by a caller to active the required selection. This field can contain
numbers 0-9, *, # or ?. The ? indicates a 3 second wait before the entry in the Telephone Number field is
dialled.
Telephone Number
The extension number, User or Department name to which a caller will be transferred when making this
selection.
Modules
Call Server
General page
Name
64 Domain Characters. Name of this module.
Description
Description of the module
Location
To provide location text information for SNMP
Locale
3 Characters. The locale that controls Caller Display type, ring sequences and the language used by
voicemail on this particular module. If blank then assume System Locale.
Serial Number
The primary MAC address of this module.
IP Address
IP Address of this module, in xxx.xxx.xxx.xxx form.