Installation and Reference Manual
Working with Voicemail
Installation and Reference Manual v3.2/0410/6 239
5 If you are using a browser the voicemail.tar0 file can be copied or moved to any location as
required.
or
If you are using the Command Prompt use the “get” command to download the required file, eg
get voicemail.tar0, and place it in the root, eg C:\. The Transmission Complete message will be
received when the transfer is complete. Enter Quit when finished.
This back up script will also back up the internal web server, please refer to the Internal Web Server
section from page 184 for further details.
1 Make a copy of voicemail.tar0 and rename it voicemail.tar. Copy this file in to the ftp directory on
the Call Server as follows.
2 Using FTP via a browser or Command Prompt log in as Admin on the relevant Call Server as
described in the Admin Access to a Call Server section from page 252.
3 If you are using a browser place voicemail.tar into this area
or
If you are using the Command Prompt use the “put” command, eg put voicemail.tar, to copy
voicemail.tar from the root, eg C:\, to this area. Once copied the Transmission Complete message
will be received
4 Reboot the Call Server and all the voicemail messages and greetings will be restored.
To Next Page
Loading...
