Splicecom Maximiser - Page 297

Installation and Reference Manual
Field Descriptions
Installation and Reference Manual v3.2/0410/6 291
Spare 1 Telephone Number
64 Characters. Telephone number. No spaces or punctuation should be used.
Spare 2 Telephone Number
64 Characters. Telephone number. No spaces or punctuation should be used.
Ambiguous Telephone Number
64 Characters. Used to match an incoming CLI range. A question mark (?) is used to indicate where the
number will be variable eg 01923287??? will match 01923 287200, 287203, 287220, 287530 etc.
Email Address
64 characters. Storage field for Contact’s email address.
Auto URL
128 Characters. Used with the PCS 60, 50 and 410/400. The address of the web page to be displayed on
a PCS when a call is made to and/or received from this Contact. This can be a web page accessed via the
Internet, stored on the customer’s Intranet or on the
max
imiser’s internal web server. This field can be
used in conjunction with the No Action, On Ring and On Connect Auto URL Mode options.
Auto URL Mode
No Action The web page specified in the Auto URL field is not automatically displayed on a PCS
when a call is made to and/or received from this Contact. However the web page can
be viewed via the Information icon on the handset.
On Ring
The web page specified in the Auto URL field is displayed while a call to or from this
Contact is ringing
On Connect The web page specified in the Auto URL field is displayed on a PCS when a call to or
from this Contact is answered
Favourites The User’s Favourites (Speed Dials) are displayed on a PCS when a call to or from this
Contact is answered
Users
The Users Directory is displayed on a PCS when a call to or from this Contact is
answered
Departments The Department Directory is displayed on a PCS when a call to or from this Contact is
answered
Auto URL Direction
Both The web page or directory will be displayed on a PCS when a call is made to this Contact and on
a PCS when a call is received from this Contact
In
The web page or directory will only be displayed on a PCS when a call is received from this
Contact
Out
The web page or directory will only be displayed on a PCS when a call is made to this Contact
Ex Directory
Enable/Disable. When enabled this Contact will not be displayed in the Contacts directory on a
PCS 580/570/560, 410/400, 100, 60 or 50.
Priority Boost
To be advised