Splicecom Maximiser - Page 320

Installation and Reference Manual
Field Descrptions
314
Installation and Reference Manual v3.2/0410/6
IP Address
IP Address of this module, in xxx.xxx.xxx.xxx form.
Product Version
Software version running on this module
Module Status
Member A module that is a part of the system
Available
A module that is waiting for permission to join
NonMember Non members are modules that are part of another system, but because of the
network are visible for this domain. This mode prevents them joining the wrong
domain.
Call Server
Name of the Call Server to which the Phone Module is registered.
Flash LED
The Flash LED button will instruct the Phone Module’s SpliceCom LED to flash 20 times.
Phone Module Page
Password
The code to be used when accessing this module via Telnet. If blank, the default setting of 7388 is used.
Trunk Module
Name
64 Domain Characters. Name of this module.
Description
Description of the module
Locale
3 Characters. The locale that controls Caller Display type, ring sequences and the language used by
voicemail on this particular module. If blank then assume System Locale.
Serial Number
The primary MAC address of this module.
Module Status
Member A module that is a part of the system
Available
A module that is waiting for permission to join
NonMember Non members are modules that are part of another system, but because of the network
are visible for this domain. This mode prevents them joining the wrong domain.
IP Address
IP Address of this module, in xxx.xxx.xxx.xxx form.
Flash LED
The Flash LED button will instruct the Trunk Module’s SpliceCom LED to flash 20 times.