EasyManua.ls Logo

Sprada TX5 - Page 33

Default Icon
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
4.4.1 Preparing a Latte Macchiato using standard settings
Place a cup or glass under the spout (Fig 5).
Turn the right rotary knob to “Latte Macchiato”. Now press the
right rotary knob.
The cup illuminates and your machine will now prepare a Latte
Macchiato using the standard settings.
Altering the standard settings in one of two ways:
a) Live Programming
The standard settings can be altered (and the new settings saved)
while your coee is being prepared:
Turn the right rotary knob to “Setting”. Now press the right rotary
knob.
Turn the right rotary knob to “Setting Recipe”. Now press the
right rotary knob.
Turn the right rotary knob to “Recipe Latte Macchiato”. Now
press the right rotary knob.
Turn the right rotary knob to “Start live Prog.“.
To alter the standard settings, press the right rotary knob.
“Aroma” (strength) appears on the display and the bean symbol
ashes.
Turn the right rotary knob to set the aroma/strength of your
choice (to the left for weaker, to the right for stronger).
Now press the right rotary knob to conrm your aroma/strength
selection.
The “Please Wait” message appears on the display. The heating
cycle is now activated and the machine starts to prepare your milk.
Preparation starts with the milk.
The “Stop Milk?” message appears on the display.
Press the right rotary knob when the correct amount of milk has
been prepared.
Your machine now begins preparing the froth.
The “Stop Foam?” message appears on the display.
Press the right rotary knob when the correct amount of froth has
been prepared.
Your machine now begins preparing the coee.
The “Stop Coee?” message appears on the display.
Press the right rotary knob when the correct amount of coee
has been prepared.
The standard setting for your Latte Macchiato has now been altered
and saved. The “Recipe Created” message appears briey on the
display, followed by the rst menu level showing the new standard
settings.
b) Manual Programming
The standard settings can also be altered manually:
Turn the right rotary knob to “Setting”. Now press the right rotary
knob.
Turn the right rotary knob to “Setting Recipe”. Now press the
right rotary knob.
4. PREPARING SPECIALITY COFFEES

Related product manuals