ST G3-PLC - Figure 42. Send ADP Data from TX to RX

Basic G3 operations UM1811
50/52 DocID026814 Rev 1
 Node 2
– Short address: 010C
– PANId: 781D
– MAC Key entry : AF4D6DCCF14DE7C1C4235E6FEF6C151F
 NSDU
– 6000000000171104FE80000000000000781D00FFFE00002AFE8000000000000078
1D00FFFE00010CF0B1F0B20017EE2C112233445566778899AABBCCDDEEFF
Once the Nsdu is correctly set (1) and the ADPD-DATA.Request command has been
executed (2), the ADPD-DATA-Indication message will be displayed in the trace window
with the SUCCESS status (3). When hovering over this message, more details on its
content are displayed.
Figure 42. Send ADP data from TX to RX