ST500 Tach-Timer Operation
© Stack Limited
27
Display Layer 4
The Corner Speed function is standard on the
ST500P and M. Optional on other models.
Layer 4 shows the minimum Corner Speed.
This is the latest value trapped by the Tach–Timer for the minimum speed
reached while cornering.
You must fit and connect the wheel speed sensor to the vehicle before the
Tach–Timer can show Corner Speeds. Otherwise, the display will show zero
for both Corner Speeds.
The Corner Speed feature is a useful tool to help drivers improve their
performance through a specific turn.
Press the Driver button to return to Layer 1.
Pop-up Display Layers
The Tach–Timer can supply information to the driver through several
pop-up messages and alarms on the display. The pop-up messages remain
on display for a short, user-configurable period. The alarms remain on
display until the alarm condition disappears or until the driver cancels
them.
You can set the time in seconds that the display shows each pop-up
message from zero (meaning that pop-up messages never appear) to 99
seconds.
To Next Page
Loading...
Need help?
General
