3. Hold the safety side (see Fig. 2) close to the long side of the bed.
4. Insert the safety side posts into the sleeves in the holder.
x To do so, press the spring against the safety side posts (see Fig. 2 - ).
x Ensure that the side with the release button is closest to the foot end of the bed (see Fig.
3 - ).
5. Insert the safety side until both ends of it click into place.
x Check that safety side is firmly attached.
6. Attach second safety side to other long side of the bed.
x To do so, repeat steps 1 to 5.
To Next Page
Loading...
