Stiegelmeyer Deka - Page 4

Contents
4
Instruction Manual
6.4 Product Variants _____________________________________________________ 22
6.5 Components of the Bed _______________________________________________ 22
6.5.1 Mattress Base in Four Sections _____________________________________________ 22
6.5.2 Two-Section Mattress Base ________________________________________________ 22
6.5.3 Bed Extensions (Optional) _________________________________________________ 22
6.5.4 Chassis ________________________________________________________________ 22
6.5.5 Electric Actuator System __________________________________________________ 23
6.5.6 3/4 Safety Sides (Optional) ________________________________________________ 24
6.5.7 Full-Length Safety Sides (Optional) __________________________________________ 25
6.5.8 Linen Holder (Optional) ___________________________________________________ 26
6.5.9 Mains Cable Holder ______________________________________________________ 27
6.5.10 Adaptor Sleeves for Patient Lifting Pole / Infusion Stand _________________________ 28
6.5.11 Universal Holders ________________________________________________________ 30
6.5.12 Attachment Points for Posey Belts ___________________________________________ 30
6.5.13 Lead-Acid Batteries ______________________________________________________ 31
6.6 Technical Data _______________________________________________________ 32
6.6.1 Type Plate _____________________________________________________________ 32
6.6.2 Materials Used __________________________________________________________ 32
6.6.3 Dimensions _____________________________________________________________ 33
6.6.4 Weight ________________________________________________________________ 33
6.6.5 Adjustment Options ______________________________________________________ 33
6.6.6 Operating Noise _________________________________________________________ 34
6.6.7 Ambient Conditions ______________________________________________________ 34
6.6.8 Electrical Data __________________________________________________________ 34
7 Putting into Service _______________________________________________ 36
7.1 Safety Information for Putting Into Service _______________________________ 36
7.2 Safety Information Concerning the Place of Use ___________________________ 36
7.3 Safety Information for Electric Hospital Beds _____________________________ 37
8 Bed Reprocessing / Bed Adaptation __________________________________ 38
8.1 New Occupancy after a Change of Patient ________________________________ 38
8.1.1 Information on Loading Capacity of Bed ______________________________________ 38
8.1.2 Requirements ___________________________________________________________ 39
8.2 Extending / Shortening the Mattress Base (Optional) _______________________ 40
8.2.1 Extending the Mattress Base _______________________________________________ 40
8.2.2 Shortening the Mattress Base ______________________________________________ 41
8.3 Using the Linen Holder (Optional) _______________________________________ 42
8.4 Removing / Inserting Laminate Panels ___________________________________ 43