Still OCV 01 - How to Add Grease

– Reinstall the oil cap, then remove it again
and check whether the traces of oil on
the dipstick are between the maximum and
minimum marks.
NOTE
You can lift again after you have finished add-
ing the oil. You must continue checking the
hydraulic oil level if there is still a banging
noise.
NOTE
Only use hydraulic oil that meets the specifica-
tions.Refer to "Lubricants Points".
How to add grease
NOTE
See Lubrication Points.
– Prepare the truck for maintenance and re-
pairs (Maintenance Instructions).
– Add grease of the correct grade to oil
cup(Lubrication Schedule).
– Add transmission oil according to service
plan.
Re-installation in the reverse order.
WARNING
It is forbidden to add transmission oil with impurity.

Maintenance
5
Maintenance work
 102 5091 801 1525EN-12/2022 - 06