Still OCV 01 - Danger to Employees

Hazard Course of action Check note
√ done
- Not applicable
Notes
DGUV rule 113-001
and observe the oper-
ating instructions
When operating driverless transport systems
Roadway quality inad-
equate
Clean/clear roadways O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Loading equipment in-
correct/slipped
Reposition load on pal-
let
O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Unpredictable driving
behaviour
Employee training O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Routes blocked Mark routes
Keep roadways clear
O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Routes intersect Announce right-of-way
rule
O German Ordinance on
Industrial Safety and
Health (BetrSichV)
No person detection
when placing goods in-
to stock and removing
goods from stock
Employee training O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Danger to employees
According to the German Ordinance on In-
dustrial Safety and Health (BetrSichV) and
labour protection law (ArbSchG), the operat-
ing company must determine and assess haz-
ards during operation, and establish the labour
protection measures required for employees
(BetrSichVO). The operating company must
therefore draw up appropriate operating in-
structions (§ 6 ArbSchG) and nominate a per-
son who is responsible for these operating
instructions. Drivers must be informed of the
operating instructions that apply to them.
NOTE
Please note the definition of the following re-
sponsible persons: "operating company" and
"driver".
Safety
2
Residual risks
 30 5091 801 1525EN-12/2022 - 06